Text only | Text with Images

PCEngine-FX.com

NEC PC Engine/TurboGrafx-16 Games/Consoles => Console Repair/Mod Center => Topic started by: schweaty on 12/06/2016, 06:01 PM

Title: Super CDROM2 DC out tip size
Post by: schweaty on 12/06/2016, 06:01 PM
Gents,

Can anyone give me the tip size for the DC out on the Super CDROM2?  I need to make a jumper cable.  Thanks!

-dan

edit:  i'm also assuming its center negative since the pc engine and both core grafx's are center neg.  let me know if i'm wrong
Title: Re: Super CDROM2 DC out tip size
Post by: Bloufo on 12/07/2016, 12:12 AM
Is this what you're looking for?



(https://i.imgur.com/sU0uCOQ.png)
Title: Re: Super CDROM2 DC out tip size
Post by: schweaty on 12/07/2016, 12:38 AM
No.  That does not tell me the tip size for DC output.  The DC out is a different size than the 6.3mm input
Title: Re: Super CDROM2 DC out tip size
Post by: mickcris on 12/07/2016, 09:44 AM
99% sure its 4.0mm x 1.7mm and it would be center negative.
Title: Re: Super CDROM2 DC out tip size
Post by: schweaty on 12/07/2016, 10:26 AM
Thx!
Title: Re: Super CDROM2 DC out tip size
Post by: schweaty on 12/07/2016, 06:15 PM
Quote from: mickcris on 12/07/2016, 09:44 AM99% sure its 4.0mm x 1.7mm and it would be center negative.
i can confirm, this is 100% correct.  thanks again!
Title: Re: Super CDROM2 DC out tip size
Post by: mickcris on 12/07/2016, 09:04 PM
Quote from: schweaty on 12/07/2016, 06:15 PM
Quote from: mickcris on 12/07/2016, 09:44 AM99% sure its 4.0mm x 1.7mm and it would be center negative.
i can confirm, this is 100% correct.  thanks again!
cool. thanks for confirming.  i added that to the gamesx power supply list
Text only | Text with Images