Hi!
I have used sync from the 6260 pin44 and it was great. Just direct connection to the RGB scart-sync.
After I recapped it the duo the signal seems a bit noisy, only on black screen. When displaying black screen its a lighter tint on top and its a bit grainy.
My question is, what route should I use? I have used regular composite before with great result.
I want as great picture as possible.
1. Should I try with a 220uF capacitor?
2. Switch to regular composite, as I have done in the past (with IFU rgb mods)
3. Use the composite signal with a sync-stripper.
A 220uf cap or larger should help with grainy picture. Regular composite should work okay as well with a black DUO.
I've have never used a sync stripper so I can't comment on that.
Thanks for the reply.
I'm gonna try that 220uF cap. When its not grainy its really crisp picture.
Might be the easy solution.
Tried it out last night and black are pitch black now. Looks great!
One thing I wonder about is when using the CD, sometimes on black "load" in-between screen the black gets a bi grainy.
Noticed that my Genesis CDX are the same. Is that some kind of No signal when using CD-drive?
Console Repair/Mod Center => Topic started by: atman on 05/11/2017, 03:07 AM