TG16 AV mod

[Official Ninja]

Nothing special, but I AV modded a TG-16. I grabbed V,L,R,G from under the board where the 69 pin connector is.
Works really good!

http://flic.kr/p/fP4zA4

[fsa]

You should try the S-Video Mod.

[albatross]

is there a tutorial on how to do this mod?

[Official Ninja]

You should try the S-Video Mod.

Have no use for Svideo really. I don't even have many TVs that have Svid inputs anymore.

[Official Ninja]

is there a tutorial on how to do this mod?

I used this link for the pins. Just find where they are on the bottom of the board. You'll need to unsolder or bend the shielding back (I bent it back). Then its a simple task of drill holes and soldering the wires to the rca jacks.

http://www.cgquarterly.com/articles/tg16_cable.htm

[albatross]

great!  thank you sir!

[Official Ninja]

great!  thank you sir!

Hey, if you do it post pics. It's always interesting to see how mods turn out. Even simple ones.

[albatross]

well i have one that was already started but im going to complete it and take pics for sure - hopefully it works when its done

[HercTNT]

buy a tennoke bank 2. can get them for about $15 on ebay from time to time. av mod it and have battery backup to boot. just need to shave the connector with a hack saw blade and it will hug a us tg16 like a glove.