RIP to BT Garner of MindRec.com... BT passed away early 2023 from health problems. He was one of the top PCE homebrew developers and founder of the OG Turbo List, then PCECP.com. Condolences to family and friends.
IMG
IMG
Main Menu

Help fixing a broken mouse?

Started by CrackTiger, 03/10/2014, 07:16 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

CrackTiger

I just got a PCE Mouse from hit-japan and noticed as soon as I took it out of the box, that the left mouse (II?) button doesn't click. I opened it up and the little pad (circled in the pic below) that the button pushes doesn't click, although the working button's pad does.

IMG

Looking at the pad from the side, it appears to be sticking out on an angle. I don't know if it is stuck inside like that or has been worn down (looks stuck to me).

IMG

Any ideas of how I can fix it? [-o<
Justin the Not-So-Cheery Black/Hack/CrackTiger helped Joshua Jackass, Andrew/Arkhan Dildovich and the DildoPhiles destroy 2 PC Engine groups: one by Aaron Lambert on Facebook, then the other by Aaron Nanto!!! Him and PCE Aarons don't have a good track record together! Both times he blamed the Aarons and their staff in a "Look-what-you-made-us-do?!" manner, never himself nor his deranged/destructive/doxxing toxic turbo troll gang which he covers up for under the "community" euphemism!

wolfman

Try fixing it with a needle. I did that in the past with stuck buttons. I pressed with the needle into the button from the side und forced it to come out. Mostly they´ll never get stuck again.

What are you using it for? I have´t had the chance to use it on a game so far....
recent addition: Japanese Language Skills, A1 proficiency level
-------------------------------------------------------------
CryptoCoin Warrior
My Setup: PC Engine LT, CD-ROM², IFU-30
AKA woolfman on AtariAge, PlanetVB, Circuit-Board.
-------------------------------------------------------------

Fidde_se

You can cut off the four bumps with a knife, there will be a metal membrane in there that you can clean with alcohol, reassemble, superglue the four holes with a toothpick, just do it outside as the fumes can go into the membrane making it a little bit non galvanic...

For GBA and DS shoulder buttons, and megadrive pause buttons, you can usually drain them in alcohol and klick like a freak to make the oxides and other residues go away.
GW/GB/GBP/GBL/GBC/GBA/GBASP/GBASP2/GBM/DS/DSL/DSiXL/3DS/PM/VB/FC/NES/SNES/N64/GC/Wii/PS/PSONE/PS2/PS2S/
SMS/SMS2/GG/NOM/MD/MD2/MD3/MD1CD/SS/DC/XB/XB360/NGP/NGPC/NGPC2/WS/WSC/CSW/PCEGT/PCE/PCECG1/PCECG2/
PCECD/TG16TE/NGAGE/GIZ/GP32/GP2XF1/GP2XF2/GP2XWIZ/GP2XCAN/DA320/ST520/ST1040/LNX/LNX2/JAG/PORT/CD32/A500/
C64/CDi/VMU/POCKSTN/PSP/PSPCFW/FDS/VSM

Fidde_se

Or just replace it with a Tact switch which it is.
Like TC-0010 http://www.suntan.com.hk/pdf/switch/TSS-TC-0010.pdf
GW/GB/GBP/GBL/GBC/GBA/GBASP/GBASP2/GBM/DS/DSL/DSiXL/3DS/PM/VB/FC/NES/SNES/N64/GC/Wii/PS/PSONE/PS2/PS2S/
SMS/SMS2/GG/NOM/MD/MD2/MD3/MD1CD/SS/DC/XB/XB360/NGP/NGPC/NGPC2/WS/WSC/CSW/PCEGT/PCE/PCECG1/PCECG2/
PCECD/TG16TE/NGAGE/GIZ/GP32/GP2XF1/GP2XF2/GP2XWIZ/GP2XCAN/DA320/ST520/ST1040/LNX/LNX2/JAG/PORT/CD32/A500/
C64/CDi/VMU/POCKSTN/PSP/PSPCFW/FDS/VSM

CrackTiger

Thanks for the help guys. I managed to pull it out using a needle. :D

Will remember these tips for the future.


Quote from: wolfman on 03/11/2014, 04:24 AMWhat are you using it for? I have´t had the chance to use it on a game so far....
I want to try mouse-play for every game which supports it. The game I most had in mind is Megami Tensei Sin. I don't know if it actually supports the mouse, but the Mega-CD version does. I tested it out with Brandish and was surprised how well the game plays using it. :)
Justin the Not-So-Cheery Black/Hack/CrackTiger helped Joshua Jackass, Andrew/Arkhan Dildovich and the DildoPhiles destroy 2 PC Engine groups: one by Aaron Lambert on Facebook, then the other by Aaron Nanto!!! Him and PCE Aarons don't have a good track record together! Both times he blamed the Aarons and their staff in a "Look-what-you-made-us-do?!" manner, never himself nor his deranged/destructive/doxxing toxic turbo troll gang which he covers up for under the "community" euphemism!

Lochlan

Quote from: guest on 03/11/2014, 09:18 PMI tested it out with Brandish and was surprised how well the game plays using it. :)
Yes to this.  Brandish is an excellent (if flawed) game when played with the mouse.
Quote from: ridgewood_general_store_1 on 08/15/2014, 11:12 AMI'm not sorry about this, as I'm not sorry about ANY attack by the goverrats.

wolfman

Quote from: guest on 03/11/2014, 09:18 PMThanks for the help guys. I managed to pull it out using a needle. :D
:D

Sadly the mouse doesn´t work on Populous - it would have been a great thing to play it that way. Unfortunately the mouse just goes berzerk when I try using it...

Modding a mouse to work with any game would be definitely a cool thing...somebody would have to figure out how to merge the controls of a pad with the mousewheels/button-combo....

Anyone?  :lol: :-" :dance:
recent addition: Japanese Language Skills, A1 proficiency level
-------------------------------------------------------------
CryptoCoin Warrior
My Setup: PC Engine LT, CD-ROM², IFU-30
AKA woolfman on AtariAge, PlanetVB, Circuit-Board.
-------------------------------------------------------------

roflmao

Is there a thread here that lists all the mouse-compatible games?  I've really wanted to pick up a mouse just for the absurdity of it, but would like to be able to use it...

wolfman

Quote from: guest on 03/12/2014, 10:59 PMIs there a thread here that lists all the mouse-compatible games?  I've really wanted to pick up a mouse just for the absurdity of it, but would like to be able to use it...
Yes, try the forum sarch.
recent addition: Japanese Language Skills, A1 proficiency level
-------------------------------------------------------------
CryptoCoin Warrior
My Setup: PC Engine LT, CD-ROM², IFU-30
AKA woolfman on AtariAge, PlanetVB, Circuit-Board.
-------------------------------------------------------------