@GTV reviews the Cosmic Fantasy 1-2 Switch collection by Edia, provides examples of the poor English editing/localization work. It's much worse for CF1. Rated "D" for disappointment, finding that TurboGrafx CF2 is better & while CF1's the real draw, Edia screwed it up...
Main Menu

Rgb modded Ifu unit, low sound fix?

Started by L-Digital, 09/10/2016, 02:56 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

L-Digital

I recently picked up a really nice rgb modded ifu unit which looks almost brand new. The only issue I have with it is that the volume on it is quite low compared to my other consoles.

Is there a simple mod or circuit I can do to the stereo lines to bring them both up to line level or thereabouts before going to scart so that I don't have to constantly Adjust volume settings when switching machines?

mickcris

#1
Is the volume louder out of the rca jacks? Perhaps the modder connected audio to the expansion port and not the rca jacks

Keith Courage

PC engine/turbografx systems do have lower volume than other consoles do. This is normal. I have had many others ask me the same question. Also, some games have much louder music than others do. JJ and Jeff is pretty loud where as the 1st bomberman and battle royal are super quiet.

As mickcris said you might want to find out if someone tapped the audio channels from the wrong place. simply check if you are getting any CD sound. If you can hear CD music then the wiring was done correctly. If the wires were hooked up the the exp port instead there would be no CD audio.

L-Digital

A bit late but thanks for the replies