RIP to BT Garner of MindRec.com... BT passed away early 2023 from health problems. He was one of the top PCE homebrew developers and founder of the OG Turbo List, then PCECP.com. Condolences to family and friends.
IMG
IMG
Main Menu

Pioneer Laserdisc player (LD-717) Problem/Cry for help

Started by xcrement5x, 01/31/2014, 11:34 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

xcrement5x

I've got a Pioneer LD-717 Laserdisc player, which is an older model Pioneer player I picked up from a thrift for a good price a couple years back.

When I first got it it would play LDs without any issues, now there seems to be some problem getting the discs to start.  When I pulled it out the closet the other night and set it up, it played the LD perfectly fine the first time I tried it.  Then when I tried with a different disc I got the distinctive clicking shown in this video, then it happened with just about any disc that was put in. 

I think is is a problem with getting the disc to start spinning, because if you let it sit there long enough it appears to go to a black video screen that never changes.

Any suggestions or advice is much appreciated!

PS-Apologies for my narration, it was pretty much done on the fly.

Demented Clone Warrior Consensus: "My pirated forum clone is superior/more "moral" than yours, neener neener neener..."  ](*,)

PCEngineHell

It will need to be serviced by a repair tech. There are still a few out there that can do it. Just be prepared to pay some cash. It could be the motor, it could be some small part has ground it self down over the years also. Its hard to figure out what is going on without actually being there in person and viewing the problem from different angles.

http://laserdiscservice.com/service.htm

xcrement5x

#2
Whelp, after talking with BlueBMW for a bit the other day I spent some time today trying to troubleshoot it a bit more since I doubted I would ever pay for servicing. 

So, it was a bit weird, that part that was making the tic tic noise must be slightly out of alignment.  When I started everything up again this time I pushed it down a bit and then that got the disc spinning and working. Thinking I was on to something I stopped it and then replicated the steps multiple times by doing the same thing to make sure it was rolling.  Once it started running fine there were no issues continuing to play a disc. 

The main reason of messing around with this really really old player is because I wanted to see if it could play the video on LA discs, which it can!

More info on the LA vids here:
https://www.pcengine-fx.com/forums/index.php?topic=10096.msg331339#msg331339
Demented Clone Warrior Consensus: "My pirated forum clone is superior/more "moral" than yours, neener neener neener..."  ](*,)