PCE - MC Cthulhu issues

[Lemony Vengeance]

Hey all,

I've crimped the cable per this post:

http://forums.shoryuken.com/discussion/100475/rj-45-multi-console-cthulhu-arcade-stick-tutorial-ver-2/p1

and all my inputs  are going nuts! Left also presses run, Right presses II.. I've seen other users having this issue as well, except when they play US games in their (modded) PCEs they don't have any issues!

Does anyone have a MC Cthulhu stick and are you experiencing the same issues?

[fraggore]

OMG didn't know it could do multiple consoles i need one.

as for you question i would start double checking your wiring you my have a ground touching another wire somewhere or you may have wired it wrong, if you got a multi meter use that for a continuity test.

[GohanX]

Lemony: I had crazy issues with mine that were fixed by using a multi tap instead of a direct connection. However, the soldering of the rj45 connection on that Cthulhu was incredibly bad, I always assumed that was my issue.

[Lemony Vengeance]

Lemony: I had crazy issues with mine that were fixed by using a multi tap instead of a direct connection. However, the soldering of the rj45 connection on that Cthulhu was incredibly bad, I always assumed that was my issue.

I wired everything up myself so I know its good . I've also been told that the multitap will fix issues so I have one from RAZO on the Neo Forums.

In other news, your Saturn/AES to Wii converter is done, just need to test it.

[GohanX]

Sweetness.