"homemade" HuCARD for translations / homebrews/ repros

[cr8zykuban0]

I would definitely like to pick up a magical chase  one to upgrade my repro cart with the chip on the hucard plus other ones im interested in

[SignOfZeta]

You retards need to understand the language that needs to be used in a thread like this. It's not that hard.

[chop5]

got some in the other day. used a 29F080 i salvaged from a dead xbox1 console. takes some getting used to with the GQ4X in getting the card pins lined up just right with the adapter but works good once done. the gq4x wont recognize the chip id so i just ignore and it erases and writes pretty fast.
gonna try other roms and experiment with it a little.
thanks ichi,your shipping was incredibly fast.

[SignOfZeta]

I got mine. Quality is superb. I don't have much else to say. Perfection?

[Gredler]

I got mine. Quality is superb. I don't have much else to say. Perfection?

Thanks for the review. Do you feel like flashing these could be performed by an absolute beginner with absolutely no rom flashing experience? Did you get the black, white, or any other variants?

[OldMan]

Do you feel like flashing these could be performed by an absolute beginner with absolutely no rom flashing experience?

It's really not hard to do. The nice thing is, if you mess it up you can erase the chip and try again

(Do check the file size, though. It drove me nuts not working until I realized I needed to remove the header from the file)

[ichigobankai]

Thanks guys ;)

IMPORTANT
Do not forget to create (or edit) the customdevices.txt file in the GQ4x directory and add the lines i've written in the 1st post.
Because the 29F080 description for the cards is not the same as the 29F080 already available in the list.
With the Willem programmer, you'll need to move the jumpers for 29F080 / 39SF040 - 29F040.

To prepare your files before flashing,
use my little app available in the 1st post (named huconv v1.5)
it will remove header and generate 2 files (for US and JAP hardware)

[Sarumaru]

Wow... these are beautiful. Great job! I hope these are around for a good minute because I have a little project in mind for this.

[ichigobankai]

Hi guys, some of you send me PM recently.
I'll update prices & offers in few hours.
To be short : I'll remove the mask part, as it take too much time to fab (last time 4 weeks...).
So I'll give EPS files to make/fab them by yourself.

[ichigobankai]

Update made.
Prices lowered (~1,5$ on each card type)

[turbokon]

I ordered some of these.  Fast shipping and they look awesome.

I'm using a GQ-4X4 (not the GQ-4X) programmer.   I can't get it to recognized the eeprom using the huprog adapter.  I have loaded all the lines to the customdevice.txt as stated earlier in post.  Has anybody else came also this?

Btw this is my first time flashing an eeprom so it could be a user error.

[turbokon]

Finally got a few hucards successfully programmed last night

[ichigobankai]

Nice   

[NightWolve]

Ah, so they're from that French team.

[SplatterTrigger]

Ahhh

[ichigobankai]

Ah, so they're from that French team.

I'm not "a team".
Ultimate-consoles is a forum (like this place) where i'm the administrator, that's all.