10/31/2023: Localization News - Dead of the Brain 1!

No, NOT a trick, a Halloween treat! Presenting the Dead of the Brain 1 English patch by David Shadoff for the DEAD last official PC Engine CD game published by NEC before exiting the console biz in 1999! I helped edit/betatest and it's also a game I actually finished in 2023, yaaay! Shubibiman also did a French localization. github.com/dshadoff/DeadoftheBrain
twitter.com/NightWolve/PCENews
Main Menu

If I do a region MOD for TG16-CD sys card 3.0

Started by waynedoodle, 11/16/2015, 11:38 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

waynedoodle

Hey guys, quick question. If I do a region mod so I can purchase a much cheaper 3.0 JPN System card for a TG16-CD, would the JPN 3.0 run both the English and Japanese Super-CD's since the CD's are not region protected?

For the price of a US 3.0 card you might as well just purchase a DUO.

Thanks,
WD

MNKyDeth

You can run JP/US cd's in any PCE/TG16 type of system as long as you have the appropriate system card. So yes, you can.

Do a region mod, use a JP system card 3.0 or Arcade Card Pro and then play any cd game of your choice.
You will also have the option of playing JP Hucards as well. :)

GohanX

Yep, I have a Japanese Arcade Card Pro almost permanently attached to my tg16.

wilykat

If you only need region mod to play System 3.0, it may be cheaper to contact someone about chopsado adapter (is he still making it?) but if you also plan to play other hucard from Japanese region, then region mod is the right path.

Stingray

Quote from: wilykat on 11/16/2015, 04:20 PMIf you only need region mod to play System 3.0, it may be cheaper to contact someone about chopsado adapter (is he still making it?) but if you also plan to play other hucard from Japanese region, then region mod is the right path.
I was wondering the exact same thing the OP asked.  What is that adapter, is it only for using the 3.0 system card?

MNKyDeth

Quote from: Stingray on 11/16/2015, 04:33 PM
Quote from: wilykat on 11/16/2015, 04:20 PMIf you only need region mod to play System 3.0, it may be cheaper to contact someone about chopsado adapter (is he still making it?) but if you also plan to play other hucard from Japanese region, then region mod is the right path.
I was wondering the exact same thing the OP asked.  What is that adapter, is it only for using the 3.0 system card?
The chopsado or any other converter will allow JP games to run on US systems or vice versa depending on the version? No idea if there were versions for both directions or not.

Plug the HuCard into the device, plug the device in to the console. Wilykat was saying that if you plan on using more than one thing, like multiple games from either region, then a region mod is most likely the best way to go.

waynedoodle

#6
Thanks for the respone and guidance guys.  Steering me in the right direction as always.

Now, important question.  For a DIY project, what do ya'll recommend?  Obey chip or one of the great board members?

WD

wilykat

Depends on how good are you with soldering iron.  If you're decent, you can get the chip and do it yourself.  But if you're the kind that can accidentally set the desk on fire just by touching the iron, pay someone to do it.

OBEY is easy to install.  But it may not work with Turbo Everdrive.  If you plan to get the chip and TED, make sure the 5v wire is tapped onto 7805 regulator chip and not elsewhere for best stability.

There's also the old 8P2T switch, no power needed but it's hard to find these switch these day.  I used to be able to see them for under $5 a pop but now day it's about $25 so it's actually more expensive than the chip mod.

waynedoodle

I love my TG 16, but DAMN what a pickey system.  Bad gears, bad capacitors, and now a decision on region mod.  This system takes an investment!

My system has been with me for over 25 years and hopefully tomorrow I can play some blazing lazers!

thanks Wilykat for the insight.  Its like you've done this before.

WD

waynedoodle

#9
What chaps my ass is the price for a us 3.0 card, you can just about buy a Duo.  If my CD would have worked 10 years ago, before I had to change the gear, I would not be in this boat!

WD

wilykat

Buy PCE 3.0 card and add chopsado.  Cheapest way to get Duo-like support on a TG-16

ginoscope

Quote from: waynedoodle on 11/20/2015, 09:25 PMWhat chaps my ass is the price for a us 3.0 card, you can just about buy a Duo.  If my CD would have worked 10 years ago, before I had to change the gear, I would not be in this boat!

WD
The US 3.0 card is insane but it was also really limited and only available via mail order.  I remember waiting what seemed like 6-8 weeks to get the card in the mail with gates of thunder.  I stupidly sold all that years ago but I am happy now with a DUO with a region mod.