Can this be done? SFGx add on module?

wilykat · 04/24/2016, 07:05 PM

PCE and TG-16 has plenty of pins in the rear port, would it be possible to make a module that contained the extra chips used by Super Grafx that plugged into the back? akin to what 32x did for Genesis? Maybe with pass through connector to dock with a CD system?

Is there a detailed schematic of Super Grafx? There's a user made schematic of PCE that could used as reference, TG-16 is nearly the same except for that 8 flipped data lines on cart port.

esteban · 04/25/2016, 07:08 AM

If alchemy is involved, then the answer is "Yes."

SignOfZeta · 04/25/2016, 05:24 PM

%100 no.

Nazi NecroPhile · 04/25/2016, 06:06 PM

I don't think all the necessary pins are there (or even most of 'em), but even if they were, wouldn't you have to destroy a SGX to get the custom parts? I suppose you could emulate 'em on a FPGA thingy, but at that point you might as well go whole hog and emulate the entire system.

wilykat · 04/25/2016, 06:23 PM

Bah so it won't be easy at all. I thought SGFx had extra graphic chip and extra RAM, that you could get out of a spare PCE or something?

Nazi NecroPhile · 04/26/2016, 11:23 AM

It has a second HuC6270 video chip that you could get from a PCE (which is still a waste) but it also has a HuC6202 chip (found only in the SGX) that coordinates the two video chips.

Vecanti · 04/27/2016, 12:48 AM

What would be the goal? One machine to play all PCE/SGX/CD/SCD/ACD? Good news! You can do this now. It's called a SuperGrafx!

wilykat · 04/27/2016, 08:16 PM

Super Grafx doesn't have built in CD system. NEC and TTI never released Super Duo console :/

Trying to hack a regular console to become Super Grafx is probably not worth the effort. If I need to wire in a couple chips just to get SFGX graphic capabilities that's like a few hundred wires. No official schematic has been released so no one has 100% accurate detail on SGFX console.